 |  |  |  |  |  |
CORNER ROLLER
This corner roller is ideal for applying joint compound
in the corners. The wood roller is covered with acrylic
lambskin to pick up just the right amount of mud.
Threaded handle for extension pole.
Item # Desc.
07090 Roller 3"D; 14"L Handle
07091 Cover only
5CR 5" Corner Roller
5CRC Cover only for 5CR
________________________________
This corner roller is ideal for applying joint compound
in the corners. The wood roller is covered with acrylic
lambskin to pick up just the right amount of mud.
Threaded handle for extension pole.
Item # Desc.
07090 Roller 3"D; 14"L Handle
07091 Cover only
5CR 5" Corner Roller
5CRC Cover only for 5CR
________________________________
CORNER TOOL – BUTTERFLY
The back edge of this angle tool is turned up to
keep plaster from accumulating on top of the tool.
Stainless steel blades. Extra long mahogany handle
is held by rustproof brass screws. The Plaster
professional’s inside corner tool.
Item # Desc.
BF 5"x4" - NEW
_______________________
The back edge of this angle tool is turned up to
keep plaster from accumulating on top of the tool.
Stainless steel blades. Extra long mahogany handle
is held by rustproof brass screws. The Plaster
professional’s inside corner tool.
Item # Desc.
BF 5"x4" - NEW
_______________________
photo coming soon
photo coming soon
CORNER TOOL – ADJUSTABLE
This trowel adjusts to any angle – inside corners 90°,
vault angles, and is made of stainless steel.
Item # Desc.
VT Versa Trowel
FC FlexCove Bullnose,
________________________________
This trowel adjusts to any angle – inside corners 90°,
vault angles, and is made of stainless steel.
Item # Desc.
VT Versa Trowel
FC FlexCove Bullnose,
________________________________
CORNER TOOL – ADJUSTABLE ROUND-IT
This adjustable rubber round-it tool can be used as a flat
knife or rounded for bullnose. Can be adjusted to any angle.
Item # Desc.
05560G Round-It Tool
___________________________
This adjustable rubber round-it tool can be used as a flat
knife or rounded for bullnose. Can be adjusted to any angle.
Item # Desc.
05560G Round-It Tool
___________________________
photo coming soon
CORNER TOOL – BULLNOSE
The Flying Disc allows you to coat 35° and 45° angles.Use
the notch to wipe bullnose clean in half the time. The belt
clip attaches to your pan for easy use. Clips to the end of
your long handle knife for those hard-to-reach wipes.
Item # Desc.
FD Bullnose & Coving Tool
________________________________
The Flying Disc allows you to coat 35° and 45° angles.Use
the notch to wipe bullnose clean in half the time. The belt
clip attaches to your pan for easy use. Clips to the end of
your long handle knife for those hard-to-reach wipes.
Item # Desc.
FD Bullnose & Coving Tool
________________________________
CORNER TOOL – BULLNOSE
This inside bullnose corner tool is made of stainless
steel and is formed at a 103° angle that will flex to
90°. 5/8" radius corner.
Item # Desc.
DW450 Blade 5" x 21/2"
CORNER TOOL – BULLNOSE
This outside bullnose corner tool is made of
stainless steel and has a 80° rounded angle that
flexes to 90°.
Item # Desc.
DW451 Blade 5" x 21/2"
_____________________________
This inside bullnose corner tool is made of stainless
steel and is formed at a 103° angle that will flex to
90°. 5/8" radius corner.
Item # Desc.
DW450 Blade 5" x 21/2"
CORNER TOOL – BULLNOSE
This outside bullnose corner tool is made of
stainless steel and has a 80° rounded angle that
flexes to 90°.
Item # Desc.
DW451 Blade 5" x 21/2"
_____________________________
CORNER TOOL – BULLNOSE
Diamond Wall’s tool fits into a standard mud pan, and
can be used for wiping down outside corners and inside
angles. Works great on arch-ways. Made of hard rubber
with metal back and wood handle.
Item # Desc.
BCT Bullnose Corner Tool
CORNER TOOL – BULLNOSE
This trowel will feather mud on both sides of the corner at
once. Works great on arched doors and windows. Metal
with rubber pads and wood handle.
Item # Desc.
2BCT 2" Bullnose Tool
____________________________
Diamond Wall’s tool fits into a standard mud pan, and
can be used for wiping down outside corners and inside
angles. Works great on arch-ways. Made of hard rubber
with metal back and wood handle.
Item # Desc.
BCT Bullnose Corner Tool
CORNER TOOL – BULLNOSE
This trowel will feather mud on both sides of the corner at
once. Works great on arched doors and windows. Metal
with rubber pads and wood handle.
Item # Desc.
2BCT 2" Bullnose Tool
____________________________
CORNER TOOL – BULLNOSE CLEANER
Wipes off all excess mud build up from the tip of the tool
as you clean the bull-nose corners in order to keep from re-
depositing any excess mud onto the newly cleaned edge.
Item # Desc.
BULL-IT Bullnose Cleaner
______________________________
Wipes off all excess mud build up from the tip of the tool
as you clean the bull-nose corners in order to keep from re-
depositing any excess mud onto the newly cleaned edge.
Item # Desc.
BULL-IT Bullnose Cleaner
______________________________
photo coming soon
CORNER TOOL
This versatile tool can finish three-way corners, clean off
corner bead, and is excellent for forming arches. This tool
will hold a true radius. It is made of sturdy but lightweight
plastic and can be used by drywall or stucco finishers.
Item # Desc.
MJK Finishing Tool - 3/4"
MJK1 1/2 Finishing Tool - 1/2"
___________________________________
This versatile tool can finish three-way corners, clean off
corner bead, and is excellent for forming arches. This tool
will hold a true radius. It is made of sturdy but lightweight
plastic and can be used by drywall or stucco finishers.
Item # Desc.
MJK Finishing Tool - 3/4"
MJK1 1/2 Finishing Tool - 1/2"
___________________________________
CORNER TOOL
Diamond Wall’s rubber wipedown knife is designed for taping
and cleaning excess mud from joints and inside angles
wider than 90°. 1" diameter extension pole can be inserted.
Item # Desc.
02063 61/2"W x 41/2"D (CPT)
___________________________________
Diamond Wall’s rubber wipedown knife is designed for taping
and cleaning excess mud from joints and inside angles
wider than 90°. 1" diameter extension pole can be inserted.
Item # Desc.
02063 61/2"W x 41/2"D (CPT)
___________________________________
CORNER TOOL – INSIDE
This corner tool is ideal for doing 90° angles with or
without bead. 1" O.D. pole can be inserted for
reaching ceiling. Head is rubber; handle is aluminum.
Item # Desc.
05565 Inside Corner Tool
________________________________
This corner tool is ideal for doing 90° angles with or
without bead. 1" O.D. pole can be inserted for
reaching ceiling. Head is rubber; handle is aluminum.
Item # Desc.
05565 Inside Corner Tool
________________________________
CORNER TOOL - CORNERBEAD
Cornerbead tools that install 11/8" and 11/4" cornerbead
without nails. One blow from rubber mallet “crimps” each side
of head. Heavy duty blades “bite” wallboard for perfect corner.
Item # Desc.
CLINCH-ON
CBT2 11/8" Cornerbead Tool by
Clinch-On® (mallet not included)
CBT 11/4" Cornerbead Tool by
Clinch-On® (mallet not included)
COM Mallet Only, Domestic
COMI Mallet Only, Imported
CBTRK Repair Kit: 2 teeth, 2 pins,
4 nuts & bolts
CBTHEAD Replacement Head for CBT
CBTWF Wide Flange Bull Nose, 7/8" flange
CBTSF Short Flange Bull Nose, 5/8" flange
DIAMOND WALL
07176 11/4" Cornerbead Tool
07177 11/8" Cornerbead Tool
WAL-BOARD
CO2 11/8" with Mallet
CO2A 11/4" with Mallet
CO2RK Repair Kit: 2 teeth, 4 nuts,
4 bolts, 2 roll pins
CODRK Deluxe Repair Kit: 4 bolts, 4 arms,
4 nuts, 2 teeth, 2 roll pins, 1 spring
_____________________________________________
Cornerbead tools that install 11/8" and 11/4" cornerbead
without nails. One blow from rubber mallet “crimps” each side
of head. Heavy duty blades “bite” wallboard for perfect corner.
Item # Desc.
CLINCH-ON
CBT2 11/8" Cornerbead Tool by
Clinch-On® (mallet not included)
CBT 11/4" Cornerbead Tool by
Clinch-On® (mallet not included)
COM Mallet Only, Domestic
COMI Mallet Only, Imported
CBTRK Repair Kit: 2 teeth, 2 pins,
4 nuts & bolts
CBTHEAD Replacement Head for CBT
CBTWF Wide Flange Bull Nose, 7/8" flange
CBTSF Short Flange Bull Nose, 5/8" flange
DIAMOND WALL
07176 11/4" Cornerbead Tool
07177 11/8" Cornerbead Tool
WAL-BOARD
CO2 11/8" with Mallet
CO2A 11/4" with Mallet
CO2RK Repair Kit: 2 teeth, 4 nuts,
4 bolts, 2 roll pins
CODRK Deluxe Repair Kit: 4 bolts, 4 arms,
4 nuts, 2 teeth, 2 roll pins, 1 spring
_____________________________________________
CORNER TOOL – INSIDE
Inside corner tool has steel blades which feather inside
corners perfectly. The 103° angle puts proper pressure on
joints. Lacquered wood handle.
Item # Desc.
DIAMOND WALL
06099 Blade 4" x 5" Side
WAL-BOARD
CT103 Blade 4" x 5" Sides
8080 Split Corner Tool - Allows Mud to Flow
_____________________________________________
Inside corner tool has steel blades which feather inside
corners perfectly. The 103° angle puts proper pressure on
joints. Lacquered wood handle.
Item # Desc.
DIAMOND WALL
06099 Blade 4" x 5" Side
WAL-BOARD
CT103 Blade 4" x 5" Sides
8080 Split Corner Tool - Allows Mud to Flow
_____________________________________________
CORNER TOOL – INSIDE
Kraft’s inside corner trowels are made of stainless steel and
are designed for finishing decorative details.
Item # Desc.
PL505 3" x 1"
PL507 3" x 11/2"
PL509 3" x 2"
________________________________
Kraft’s inside corner trowels are made of stainless steel and
are designed for finishing decorative details.
Item # Desc.
PL505 3" x 1"
PL507 3" x 11/2"
PL509 3" x 2"
________________________________
CORNER TOOL – OUTSIDE
These outside corner tools are designed for finishing
cornerbead around windows and doors. Comfortable
wood handle.
Item # Desc.
DIAMOND WALL
06100 Blade 21/2" x 41/4" Sides
WAL-BOARD
OT113 Blade 21/2" x 4" Sides)
____________________________________
These outside corner tools are designed for finishing
cornerbead around windows and doors. Comfortable
wood handle.
Item # Desc.
DIAMOND WALL
06100 Blade 21/2" x 41/4" Sides
WAL-BOARD
OT113 Blade 21/2" x 4" Sides)
____________________________________
photo coming soon
CORNER TOOL – OUTSIDE
Kraft’s outside corner trowels are made of stainless
steel and are used for cleanly finishing square
corners around windows and doors. Wood handle.
Item # Desc.
PL504 3" x 1"
PL506 3" x 11/2"
PL508 3" x 2"
______________________________
Kraft’s outside corner trowels are made of stainless
steel and are used for cleanly finishing square
corners around windows and doors. Wood handle.
Item # Desc.
PL504 3" x 1"
PL506 3" x 11/2"
PL508 3" x 2"
______________________________
photo coming soon
CORNER TOOL
Kraft’s corner trowel has a 90° angle blade and is made
of one-piece stainless steel.
Item # Desc.
PL320 5" x 33/4"
__________________________
Kraft’s corner trowel has a 90° angle blade and is made
of one-piece stainless steel.
Item # Desc.
PL320 5" x 33/4"
__________________________
photo coming soon
EDGERS - WIND-LOCK
Item # Desc.
TEKIT Outside Corner Edger Kit - wood
handles - Incl. sizes 3/4"x 3/4", 1" x 1",
11/2" x 11/2", and 2" x 2" - NEW
____________________________________________
Item # Desc.
TEKIT Outside Corner Edger Kit - wood
handles - Incl. sizes 3/4"x 3/4", 1" x 1",
11/2" x 11/2", and 2" x 2" - NEW
____________________________________________
| Customer Service & Ordering Toll Free (800) 582-8665 / Fax (800) 282-8665 / e-mail: info@toolsfortrades.com |
Corner Tools & Edgers
| Std. Pk. 10 25 1 25 |
| Std. Pk. 1 |
| Std. Pk. 1 |
| Std. Pk. 12 1 |
| Std. Pk. 10 |
| Std. Pk. 1 |
| Std. Pk. 1 |
| Std. Pk. 5 |
| Std. Pk. 5 |
| Std. Pk. 36 |
| Std. Pk. 30 30 |
| Std. Pk. 12 |
| Std. Pk. 1 1 25 24 1 1 1 1 1 1 1 1 1 1 |
| Std. Pk. 12 |
| Std. Pk. 5 5 5 |
| Std. Pk. 6 6 1 |
| Std. Pk. 6 6 |
| Std. Pk. 5 5 5 |
| Std. Pk. 5 |
| Std. Pk. 12 |